H-Fix Humeral Nail System
– ANATOMICAL DESIGN
Straight proximal design and central insertion point. Distal angulation follows the anatomy of the humerus, increasing biomechanical stability and reducing the risk of complications during insertion. Created to avoid the groove between the greater tubercle and the head of the humerus, where the supraspinatus tendon connects.
– DuoFix 4.5 SCREWS
- POSSIBILITY OF LOCKING SCREW 3.5 IN SCREW HEAD 4.5
Innovation that improves stability - SELF-TAPPING
Simplifies the surgical process. - 4 SUTURE HOLES
Facilitates fixation of the rotator cuff tendons.
The calcar ascending screw and 3.5 mm screw variants are designed to increase resistance against head migration, varus deformities and major tubercle rotations.
-BICORTICAL COMPRESSION WITH A LONG NAIL
Designed to increase stability in transverse and short oblique fractures of the humerus.
-DISTAL LOCKING IN SAFE ZONE
The distal locking is applied in the anatomically safe area between the median and radial nerves, with two distal locking options in the AP direction to allow for manual locking.
-LIGHTWEIGHT INSTRUMENTS
Distal strut and proximal locking arm made of CARBON FIBER.
-Titanium alloy (Ti6Al4V ELI, ASTM F136).
| Short Humeral Intramedullary Nail H-Fix | |
| Length | Diameter 9mm |
| 160mm | Left Code 387.160 / Right Code 537.160 |
| Humeral Intramedullary Nail H-Fix | |
| Diameter 7mm | Diameter 8mm |
| Left Code 390.200 / Right Code 463.200 | Left Code 391.200 / Right Code 464.200 |
| Left Code 390.220 / Right Code 463.220 | Left Code 391.220 / Right Code. 464.220 |
| Left Code 390.240 / Right Code 463.240 | Left Code 391.240 / Right Code 464.240 |
| Left Code 390.260 / Right Code 463.260 | Left Code 391.260 / Right Code 464.260 |
| Left Code 390.280 / Right Code 463.280 | Left Code 391.280 / Right Code 464.280 |
| Left Code 390.300 / Right Code 463.300 | Left Code 391.300 / Right Code 464.300 |
| End Cap |
| 0mm, 5mm, 10mm, 15mm, 20mm. |
| Screws |
|
4.5mm Locking Pin for H-Fix Intramedullary Nail (Code 423, Length 20mm-60mm) 3.5mm Locking Screw for H-Fix Intramedullary Nail (Code 421, Length 25mm-55mm) 3.5mm Torx Locking Screw for Intramedullary Nail (Code 195X, Length 25mm-55mm) |